Asycube Largo A5 - Asyril SA
Operating Manual
©
Copyright Asyril S.A.
Transportation, handling and installation
v1.2
FO 32.03.118
Operating Manual
Asycube Largo A5
- Asyril SA
26/45
Installation and storage environment
3.4.
WARNING !
The Asycube must be mounted on a smooth, flat and strong surface. Ensure yourself
that the Asycube is not submitted to mounting flexure. Failure to do so would degrade
feeder performance.
Installation environment
3.4.1.
The Asycube can be used under following conditions:
-
The asycube is IP20
-
Working temperature: +5°C to +40°C
-
Humidity: 30% to 80%max. non-condensing
WARNING !
In the case humidity or temperature variation, note that it might affect the global
performances of the Asycube.
-
Avoid extreme electromagnetic waves, ultraviolet rays and radiation.
-
Avoid using the product in a place where the main unit or controller may be exposed to water
or oil droplets.
-
Clean room application: cleanliness class ISO7
WARNING !
Do not use the product in an atmosphere of corrosive gases. Rust may form and reduce
the structural strength of the product.
Storage environment
3.4.2.
The storage environment should be similar to the operating environment. In addition, you
should protect the Asycube against dust
