ASUSTOR AS6102T, Быстрое руководство по установке

Страница: 16 / 36

16
When installing a single memory module, follow the steps outlined below.
1. Locate the two pre-installed memory modules as indicated in the graphic below.
2. For both memory modules, pull back the black protective covering, and then release the ejector clips
by gently pulling them out to the sides. Remove the memory modules.
3. Diagonally slide the new memory module into slot No.1 (as shown in the graphic below) making sure
that the memory module’s connectors are fully inserted into the slot. Using two fingers, carefully push
down and then back on the memory module until it clicks into place. You should be able to hear an
audible “click”.