107
Steering Trigger Condition
This set of controls sets the criteria to initiate band steering.
• Bandwidth Utilization
When bandwidth use exceeds this percentage, steering will
be initiated. Broadcom's documentation does not say how
utilization is measured.
• Enable Load Balance
This controls load balancing. Broadcom's documentation does
not indicate how balancing is done.
• RSSI
If the received signal level of any associated client meets this
criteria, steering will be triggered.
• PHY Rate Less / PHY Rate Greater
These controls determine STA link rates that trigger band
steering.
• VHT
This controls determines how 802.11ac and non-ac clients are
handled.
•
ALL
(default) means any type of client can trigger steering.
•
AC only
means a client must support 802.11ac to trigger
steering.
•
Not-allowed
means only non-802.11ac clients will trigger
steering, i.e. 802.11a/b/g/n.
Содержание ROG Rapture GT-AC5300
Страница 1: ...E12817 ...
Страница 37: ...37 3 Click to add the game 4 Click Apply to apply all the profiles ...
Страница 119: ...119 9 Click Next to accept the default name for the printer 10 Click Finish to complete the installation ...
Страница 122: ...122 5 4 2 NZB settings You can set up a USENET server to download NZB files After entering USENET settings Apply ...