82
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
9.6.1.2 Access Self Access Rule Configuration Page – (Firewall
-> Advanced -> Self Access)
Log into Configuration Manager as administrator. Click
Firewall ->
Advanced -> Self Access. The Firewall Self Access Rule Configuration
page displays as shown in Figure 9.13.
When you open the Self Access Configuration page, a list of existing Self
Access rules is also displayed at the bottom half of the configuration page
such as those shown in Figure 9.13.
9.6.1.3 Add a Self Access Rule
To add a Self Access rule
1. Open the Self Access Rule Configuration page. See section
9.6.1.2
Access Self Access Rule Configuration Page
.
2. Select
Add New
from the
Self Access
rule drop-down list.
3. Select a protocol from the
Protocol
drop-down list. If you select TCP or
UDP protocol, you will need to enter port number as well.
4. Click on <
Add
> to create the new Self Access rule. The new rule will
then be displayed in the Self Access Rule list table at the bottom half of
the Self Access Rule Configuration page.
Example
Figure 9.13 displays the screen with entries to:
Add a new Self Access rule to:
• Allow TCP port 80 traffic (i.e. HTTP traffic) from the LAN and deny the
HTTP traffic from the WAN port (i.e. from the external network) to the
Internet Security Router.
9.6.1.4 Modify a Self Access Rule
To modify a Self Access rule
1. Open the Self Access Rule Configuration page. See section
9.6.1.2
Access Self Access Rule Configuration Page
.
