13
Chapter 3 - Quick Start Guide
ASUS SL1200
Table 3.1. LED Indicators
LED
Description
POWER
Solid green to indicate that the device is turned on. If this light
is not on, check if the power adapter is attached to the Internet
Security Router and if it is plugged into a power source.
LAN1 – LAN4
Solid green to indicate that the device can communicate with
your LAN or flashing when the device is sending or receiving
data from your LAN computer.
WAN
Solid green to indicate that the device has successfully
established a connection with your ISP or flashing when the
device is sending or receiving data from the Internet.
Check the LED indicators (refer to Table 3.1) to determine if
the hardware setup is working properly.
3.2 Part 2 — Configuring Your Computers
This section provides instructions for configuring the Internet settings on
your computers to work with the router.
3.2.1 Before you begin
By default, the ASUS SL1200 automatically assigns all required Internet
settings to your PCs. You need only to configure the PCs to accept the
information when it is assigned.
In some cases, you may want to configure network settings
manually to some or all of your computers rather than allow
the Internet Security Router to do so. See
3.2.6: Assigning
static IP addresses to your PCs
for instructions.
If you have connected your PC via Ethernet to the router, follow the
instructions that correspond to the operating system installed on your PC.
