manualshive.com logo in svg

Asus RS700A-E9 V2 Series, Руководство пользователя, Страница: 19 / 192

Поделиться
Скачать
Asus RS700A-E9 V2 Series Скачать руководство пользователя страница 19

ASUS RS700A-E9 Series V2

1-9

1.6 

Internal features

The barebone server includes the basic components as shown.

The barebone server does not include a floppy disk drive. Connect a USB floppy disk drive 

to any of the USB ports on the front or rear panel if you need to use a floppy disk.

WARNING

HAZARDOUS MOVING PARTS 

KEEP FINGERS AND OTHER BODY PARTS AWAY

1. 

Redundant Power supply

2. 

ASUS KNPP-D32-R Server 

Board

3. 

System fans

4. 

4 x 3.5“ storage device 

trays

5. 

SATA/SAS backplane 

(hidden)

6. 

Slim type optical drive 

(hidden)

7. 

OCP Mezzanine card 

(optional)

8. 

Butterfly riser card 

 

(2 x Gen3 x8 link)

9. 

Riser card (Gen3 x16 link)

10.  Asset tag (hidden)

A protection film is pre-attached to the front cover before shipping. Please remove the 

protection film before turning on the system for proper heat dissipation.

RS700A-E9-RS4V2

Содержание RS700A-E9 V2 Series

































































































































































































Отзывы:

Нет отзывов