Asus RS700A-E9 V2 Series Скачать руководство пользователя страница 115

Страница: 115 / 192

ASUS RS700A-E9 Series V2

4-17

10. Auxiliary panel connector (20-2 pin AUX_PANEL1, 20-pin AUX_PANEL2)

This connector is for additional front panel features including front panel SMB, locator

LED and switch, chassis intrusion, and LAN LEDs.

1. Front panel SMB (6-1 pin FPSMB)

This 6-1 pin connector is for the front panel SMBus cable.

2. LAN activity LED (2-pin LAN1_LED, LAN2_LED)

This 2-pin connector is for the Gigabit LAN activity LEDs on the front panel.

3. Locator LED (2-pin LOCATORLED1, 2-pin LOCATORLED2)

This 2-pin connector is for the locator LED1 and LED2 on the front panel. Connect

the Locator LED cables to these 2-pin connector. The LEDs will light up when the

Locator button is pressed.

4. Locator Button/Switch (2-pin LOCATORBTN)

This 2-pin connector is for the locator button on the front panel. This button

queries the state of the system locator.

5. LAN activity LED and USB port (2-pin LAN3_LED, LAN4_LED, USB ports)

These 2-pin connectors are for the Gigabit LAN activity LEDs and USB ports on

the front panel.

Содержание RS700A-E9 V2 Series

































































































































































































Результаты поиска

Содержание RS700A-E9 V2 Series

Отзывы:

Asus RS700A-E9 V2 Series, Руководство пользователя, Страница: 115 / 192

Результаты поиска

Содержание RS700A-E9 V2 Series

Отзывы: