Asus RS700A-E9 V2 Series, Руководство пользователя, Страница: 165 / 192

5-43 ASUS RS700A-E9 Series V2
NBIO RAS Control [MCA]
Configuration options: [Disabled] [MCA] [Legacy]
Egress Poison Severity High [30011]
Each bit set to 1 enables HIGH severity on the associated IOHC egress port. A bit of 0
indicates LOW severity.
Egress Poison Severity Low [4]
Each bit set to 1 enables HIGH severity on the associated IOHC egress port. A bit of 0
indicates LOW severity.
NBIO SyncFlood Generation [Auto]
This value may be used to mask SyncFlood caused by NBIO RAS options. When set
to TRUE, SyncFlood from NBIO is masked. When set to FALSE, NBIO is capable of
generating SyncFlood.
Configuration options: [Disabled] [Enabled] [Auto]
NBIO SyncFlood Reporting [Disabled]
This value may be used to enable SyncFlood reporting to APML. When set to TRUE,
SyncFlood will be reported to APML. When set to FALSE, the reporting will be
disabled.
Configuration options: [Disabled] [Enabled]
Egress Poison Mask High [fffcffff]
These set the enable mask for masking of errors logged in EGRESS_POISON_
STATUS. For each bit set to 1, errors are masked. For each bit set to 0, errors trigger
response actions.
Egress Poison Mask Low [fffffffb]
These set the enable mask for masking of errors logged in EGRESS_POISON_
STATUS. For each bit set to 1, errors are masked. For each bit set to 0, errors trigger
response actions.
Uncorrected Converted to Poison Enable Mask High [30000]
These set the enable mask for masking of uncorrectable parity errors on internal
arrays. For each bit set to 1, a system fatal error event is triggered for UCP errors on
arrays associated with that egress port. For each bit set to 0, errors are masked.
Uncorrected Converted to Poison Enable Mask Low [4]
These set the enable mask for masking of uncorrectable parity errors on internal
arrays. For each bit set to 1, a system fatal error event is triggered for UCP errors on
arrays associated with that egress port. For each bit set to 0, errors are masked.
System Hub Watchdog Timer [a28]
This value specifies the timer interval of the SYSHUB Watchdog Timer in milliseconds.
SLink Read Response OK [Disabled]
This value specifies whether SLINK read response errors are converted to an Okay
response. When this value is set to TRUE, read response errors are converted to Okay
responses with data of all FFs. When set to FALSE, read response errors are not
converted.