Asus RS700A-E9 V2 Series Скачать руководство пользователя страница 125

Страница: 125 / 192

5-3

ASUS RS700A-E9 Series V2

Press <Tab> to switch to the

Drive

field.

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,

then press <Enter>.

Press <Tab> to switch to the

Folder Info

field.

Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform

the BIOS update process. Reboot the system when the update process is done.

•

This function can support devices such as a USB flash disk with FAT 32/16 format and

single partition only.

•

DO NOT shut down or reset the system while updating the BIOS to prevent system

boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and stability. Press

<F5> and select

Yes

to load the BIOS default settings.

5.1.2

ASUS EZ Flash Utility

The ASUS EZ Flash Utility feature allows you to update the BIOS without having to use a

DOS-based utility.

Before you start using this utility, download the latest BIOS from the ASUS website at

www.asus.com.

To update the BIOS using EZ Flash Utility:

Insert the USB flash disk that contains the latest BIOS file into the USB port.

Enter the BIOS setup program. Go to the

Tool

menu then select

ASUS

EZ Flash

Utility

. Press <Enter>.

Current Platform

Platform : KNPP-D32-R

Version : 0215

Build date: 09/13/2019

New Platform

Platform : KNPP-D32-R

Version : 0217

Build date: 10/02/2019

ASUS Tek. EzFlash Utility

FS0

FS1

[Up/Down/Left/Right]:Switch [Enter]:Choose [q]:Exit

Содержание RS700A-E9 V2 Series

































































































































































































Результаты поиска

Содержание RS700A-E9 V2 Series

Отзывы:

Asus RS700A-E9 V2 Series, Руководство пользователя, Страница: 125 / 192

Результаты поиска

Содержание RS700A-E9 V2 Series

Отзывы: