Asus P9X79 WS Скачать руководство пользователя страница 142

Страница: 142 / 186

4-6

Chapter 4: Software support

Chapter 4

Auto Tuning

ASUS TurboV EVO includes two auto tuning modes, providing the most flexible auto-tuning

options.

•

The overclocking result varies with the CPU model and the system configuration.

•

To prevent overheating from damaging the motherboard, a better thermal environment

is strongly recommended.

• Fast Tuning

: fast CPU overclocking

• Extreme Tuning

: extreme overclocking for CPU and memory

Using Fast Tuning

1. Click the

Auto Tuning

tab and

then click

Fast

2. Read through the warning

messages and click

to start

auto-overclocking.

CPU Strap

Allows you to manually adjust CPU Strap.
1.

Click on the

CPU Strap

tab.

Click on the adjustment bar to the desired value. The graph on the right will change

value accordingly.

Click on

Apply

to make the change take effect.

CPU Strap

Click to restore

all start-up

settings

Adjustment bar

Applies all changes

immediately

Undoes all changes

without applying

•

Every CPU Strap support is subject to the physical characteristics of individual CPUs.

Содержание P9X79 WS



























































































































































































Результаты поиска

Содержание P9X79 WS

Отзывы:

Asus P9X79 WS, Руководство пользователя, Страница: 142 / 186

Результаты поиска

Содержание P9X79 WS

Отзывы: