background image

Chapter 2: BIOS setup

2-9

2.3.1 

System Time [xx:xx:xx]

Allows you to set the system time.

2.3.2 

System Date [Day xx/xx/xxxx]

Allows you to set the system date.

2.3.3 

Legacy Diskette A [1.44M, 3.5 in.]

Sets the type of floppy drive installed. 

 

Configuration options: [Disabled] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] 

 

[1.44M, 3.5 in.] [2.88M, 3.5 in.]

2.3.4 

Primary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE devices. There is 

a separate submenu for each IDE device. Select a device item then press <Enter> to display 

the IDE device information.

The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, 

LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These 

values are not user-configurable. These items show Not Detected if no IDE device is installed 

in the system.

Type [Auto]

Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the appropriate 

IDE device type. Select [CDROM] if you are specifically configuring a CD-ROM drive. Select 

[ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive.

 

Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]

2.3 

Main menu

When you enter the BIOS Setup program, the 

Main

 menu screen appears, giving you an 

overview of the basic system information.

Refer to section 

2.2.1 BIOS menu screen

 for information on the menu screen items and 

how to navigate through them.

v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.

BIOS SETUP UTILITY

Main

     Ai Tweaker     Advanced     Power     Boot    Tools     Exit 

System Time 

 [10:17:30]

System Date 

 [Tue 08/27/2008] Legacy 

Diskette A 

 [1.44M, 3.5 in.]

  Primary IDE Master 

:[Not Detected]

  Primary IDE Slave 

:[Not Detected]

  SATA1        

:[Not Detected]

  SATA2         

:[Not Detected]

  SATA3 

:[Not Detected]

  SATA4 

:[Not Detected]

  SATA5 

:[Not Detected]

  SATA6 

:[Not Detected]

  Storage Configuration

  System Information

←→

  Select Screen

↑↓

   Select Item

+-   Change Field

Tab  Select Field

F1   General Help

F10  Save and Exit

ESC  Exit

Use [ENTER], [TAB]

or [SHIFT-TAB] to 

select a field.

Use [+] or [-] to

configure system Time.

Содержание M4A78 PRO - Motherboard - ATX









































































Отзывы: