Asus M4A78 PRO - Motherboard - ATX Скачать руководство пользователя страница 55

Страница: 55 / 72

Chapter 2: BIOS setup

2-11

DMA Mode [Auto]

Selects the DMA mode.

Configuration options: [Auto]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.

Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

2.3.6

Storage Configuration

This menu allows you to configure the SATA devices.

OnChip SATA Channel [Enabled]

Enables or disables the OnChip SATA Channel.

Configuration options: [Enabled] [Disabled]

OnChip SATA Type [IDE]

Allows you to select the SATA type.

Configuration options: [IDE] [RAID] [AHCI]

• If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage

devices, keep the default setting [IDE].

• If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface

(AHCI), set this item to [AHCI]. The AHCI allows the onboard storage driver to enable

advanced Serial ATA features that increases storage performance on random workloads

by allowing the drive to internally optimize the order of commands.

• When SATA is configured as [AHCI] in BIOS, only SATA port 1-4 can be detected.

Ensure to install the AHCI driver to detect and use SATA port 2-6 in AHCI mode under

OS.

• If you want to create a RAID 0, RAID 1, and RAID 10 configuration from the Serial ATA

hard disk drives, set this item to [RAID].

2.3.7

System Information

This menu gives you an overview of the general system specifications. The BIOS

automatically detects the items in this menu.

BIOS Information

Displays the auto-detected BIOS information.

Processor

Displays the auto-detected CPU specification.

System Memory

Displays the auto-detected system memory.

Содержание M4A78 PRO - Motherboard - ATX









































































Результаты поиска

Содержание M4A78 PRO - Motherboard - ATX

Отзывы:

Похожие инструкции для M4A78 PRO - Motherboard - ATX

Бренды по названию

Популярные бренды

Asus M4A78 PRO - Motherboard - ATX, Руководство пользователя

Результаты поиска

Содержание M4A78 PRO - Motherboard - ATX

Отзывы:

Похожие инструкции для M4A78 PRO - Motherboard - ATX

Бренды по названию

Популярные бренды