Asus ESC2000 Скачать руководство пользователя

Страница: 132 / 226

5-2

Chapter 5: RAID configuration

5.1

RAID configurations

The system supports the following SATA RAID solutions:

•

LSI MegaRAID software RAID Configuration Utility

with RAID 0, RAID 1, and RAID

10 support (for both Linux and Windows OS).

•

Intel Rapid Storage Technology enterprise SCU / SATA Option ROM Utility

with

RAID 0, RAID 1, RAID 10, and RAID 5 support (for Windows OS only).

•

Marvell RAID utility

with RAID 0 and RAID 1 support.

•

You must install Windows

XP Service Pack 3 or later versions before using Serial

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows

XP SP3 or later versions.

•

Due to Windows

XP / Vista limitation, a RAID array with the total capacity over 2TB

cannot be set as a boot disk. A RAID array over 2TB can only be set as a data disk

only.

•

Intel

SATA ports do not support AHCI and RAID modes on Windows

XP.

•

If you want to install a Windows

operating system to a hard disk drive included in a

RAID set, you have to create a RAID driver disk and load the RAID driver during OS

installation. Refer to section

6.1.1 Creating a RAID driver disk

for details.

5.1.1

RAID definitions

RAID 0 (Data striping)

optimizes two identical hard disk drives to read and write data in

parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a

sustained data transfer rate, double that of a single disk alone, thus improving data access

and storage. Use of two new identical hard disk drives is required for this setup.

RAID 1 (Data mirroring)

copies and maintains an identical image of data from one drive to

a second drive. If one drive fails, the disk array management software directs all applications

to the surviving drive as it contains a complete copy of the data in the other drive. This RAID

configuration provides data protection and increases fault tolerance to the entire system. Use

two new drives or use an existing drive and a new drive for this setup. The new drive must be

of the same size or larger than the existing drive.

RAID 5

stripes both data and parity information across three or more hard disk drives. Among

the advantages of RAID 5 configuration include better HDD performance, fault tolerance, and

higher storage capacity. The RAID 5 configuration is best suited for transaction processing,

relational database applications, enterprise resource planning, and other business systems.

Use a minimum of three identical hard disk drives for this setup.

RAID 10

is data striping and data mirroring combined without parity (redundancy data) having

to be calculated and written. With the RAID 10 configuration you get all the benefits of both

RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive

and three new drives for this setup.

Содержание ESC2000



































































































































































































































Результаты поиска

Содержание ESC2000

Отзывы:

Похожие инструкции для ESC2000

Бренды по названию

Популярные бренды

Asus ESC2000, Руководство пользователя

Результаты поиска

Содержание ESC2000

Отзывы:

Похожие инструкции для ESC2000

Бренды по названию

Популярные бренды