manualshive.com logo in svg

Asus B1A, Справочник по аппаратуре

Поделиться
Скачать
Asus B1A Скачать руководство пользователя страница 24

24

Getting Started

Installing and Removing the Battery Pack

Your Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have
its battery pack installed, there will be a large opening at the bottom of the Notebook PC. Use the
following procedures to install or remove the battery pack.

WARNING! Only use battery packs and power adapters supplied with this Notebook
PC or specifically approved by the manufacturer or retailer for use with this model.

WARNING! Never attempt to remove the battery pack while the Notebook PC is turned
ON, as this may result in the loss of working data.

To install the battery pack:

1. Insert the battery pack with the connec-
tor side first and you will hear a loud click
when the battery pack locks into place.

1

1

2

To remove the battery pack:

1. Unlock the battery by holding both

switches to 

L

 with both of your index fin-

gers and slide the battery pack out.

Содержание B1A







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды