Asus AP5000, Руководство по установке

Страница: 23 / 32

ASUS AP5000 Installation Guide 23
III. Integration Procedures
III. Integration
Requirements
Indicator lights
This section shows that the indicator light (Fig 3-22) specification of both
Back Plane Board SAF-TE (Table 3-1) and back plane board non SAF-TE
(Table 3-2). Also the Key lock is used to insure the power is entirely being
off while Key Lock is opened during the process of hot swap.
Table 3-1: Device Indicator Specification of SAF-TE
Table 3-2: Device Indicator Specification of Non SAF-TE
Device Status Indicator Light-1 Indicate Light-2
Power ON OFF
Drive Access ON Blink
Key Lock
Light-2 (SLED)
Light-1 (PLED)
Fig 3-22: Indicator Light of Drive Bay
Device Status Indicator Light-1 Indicate Light-2 Color of Light
No Error OFF NO NO
Faulty ON OFF Red
Identify Alternating Fast Blink (3 /sec) Red/Green
between Light-1 and Light-2
Rebuild OFF Fast Blink (3 /sec) Green
Rebuild Stopped OFF ON Green
Ready for Insertion/Removal ON ON Yellow
Predicated Fault Fast Blink (3 /sec) OFF Red
Hot Spare Fast Blink (3 /sec) Fast Blink (3 /sec) Yellow
In Failed Array Fast Blink (3 /sec) ON Red/Yellow
In Critical Array Slow Blink (1 /sec) OFF Red