Asus AP5000, Руководство по установке

Страница: 11 / 32

ASUS AP5000 Installation Guide 11
DRIVE BAY
There are two types of drive bays, that could mount, floppy drive, CD-
ROM drive and hard disk drive. One type is fixed type and another is
removable type which has key-lock feature, refer to the following figures:
BACK PLANE BOARD
The ASUS Back Plane Board, DA-BP4 series, were designed for carrying
four removable SCSI devices per Back Plane Board. Normally those re-
movable SCSI drives are installed on the Hot-Swap Drive Bay with a small
slot card connected together (Fig 2-7). When the completed drive set plugs
in, the slot board of drive Bay and bus of DA-BP4 will be connected to-
gether. After that, all the four SCSI-ID of SCSI devices could be managed
from the switches of Back Plane Board (Fig 2-6). Moreover there are two
models of Back Plane Boards available for none SAF-TE and SAF-TE which
are named DA-BP4-1 and DA-BP4-1S. SAF-TE one mounted one more
management chip named GEM200RE in which could provide additional
status information of device drives (Detail refer to chapter 3).
Fig 2-6: DA-BP4 series Back Plane Board
II. BARE-BONE KITS
Fig 2-4: Fixed type drive bay
Fig 2-5: Hot-Swap drive bay
II. BARE-BONE KITS