Asus 90MB0YB0-M0EAY0, Руководство пользователя

Страница: 24 / 86

1-10
Chapter 1: Product Introduction
Chapter 1
1.1.9 Internal connectors
1. Intel
®
Serial ATA 6Gb/s connectors (7-pin SATA6G_1~4)
These connectors connect to Serial ATA 6Gb/s hard disk drives via Serial ATA 6Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel ® Rapid Storage Technology through the onboard Intel ®
Z390 chipset.
• These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST
Premium With Intel Optane System Acceleration (RAID)].
• For more information on configuring your RAID sets, please refer to the
RAID
Configuration Guide which you can find at https://www.asus.com/support.
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA6G_4
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXN4
RSATA_RXP4
GND
SATA6G_3
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXN3
RSATA_RXP3
GND
ON
OFF
ROG STRIX Z390-I GAMING
Intel
®
SATA 6Gb/s connectors
A
A B
B
2. Memory LED (MEMOK_II_LED)
The MEMOK_II_LED will light up and remain lit while the MemOK! II function is in use.
When the re-training is complete, the MEMOK_II_LED will turn off.
ON
OFF
ROG STRIX Z390-I GAMING MemOK II LED
MEMOK_II_LED