Asus 90MB0YB0-M0EAY0, Руководство пользователя

Страница: 67 / 86

ROG STRIX Z390-I GAMING
3-17
Chapter 3
SMART Self Test
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
SATA6G_1(Black) - SATA6G_4(Black)
SATA6G_1(Black) - SATA6G_4(Black)
This item allows you to enable or disable the selected SATA port. Configuration
options: [Disabled] [Enabled]
Hot Plug
These items appear only when the SATA Mode Selection is set to [ AHCI ] and allows
you to enable or disable SATA Hot Plug Support. Configuration options: [Disabled]
[Enabled]
3.6.6 PCH-FW Configuration
This item allows you to configure the firmware TPM.
SATA Mode Selection
This item allows you to set the SATA configuration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to
use the AHCI (Advanced Host Controller Interface). The
AHCI allows the onboard storage driver to enable advanced
Serial ATA features that increases storage performance
on random workloads by allowing the drive to internally
optimize the order of commands.
[ Intel RST Premium With
Intel Optane System
Acceleration(RAID)]
Set to [Intel RST Premium With Intel Optane System
Acceleration(RAID)] when you want to create a RAID
configuration from the SATA hard disk drives.
3.6.7 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
Hyper M.2X16
[Disabled] Only one SSD installed onto the Hyper M.2 X16 card can be detected.
[Enabled] Two or three SSDs installed onto the Hyper M.2 X16 card can be detected.
The number of SSDs that can be detected varies with the configuration of the PCIe x16
slot.
HD Audio
This item allows you to use the Azalia High Definition Audio Controller. Configuration options:
[Disabled] [Enabled]