AstroNova QuickLabel Kiaro! QL-120, Руководство пользователя

Страница: 33 / 173

Getting Started
QL-120 User Guide 33
6. If you are using gap or reflective mark media, cut the media edge that will be fed into the
printer. If you are using continuous media, skip this step.
• Gap media has spaces between each label resulting from the removal of the matrix
during the die cutting process.
If you are using gap media, cut the media between labels as illustrated by the
dashed red line below. The arrow indicates the direction of media feed into the
printer.
• Reflective mark media has black cue marks printed on the back of the label liner.
These marks are read by a sensor on the printer to determine the starting point of
new labels.
If you are using reflective mark media, cut the media between labels, but before the
mark, as illustrated by the dashed red line below. The arrow indicates the direction
of media feed into the printer.