AstroNova QuickLabel Kiaro! QL-120, Руководство пользователя

Страница: 150 / 173

QL-120 User Guide 150
6
RW-5.1 Rewinder
Before Installing the Rewinder
Before installing the rewinder, observe the following precautions.
• No rewinder feet should float. The rewinder must be held level constantly.
• The rewinder must be installed on the same plane as the printer.
• When placing the rewinder on a desk, table, or other similar surface, it must be sturdy
and stable enough to support the weight of the printer and the rewinder.
• Do not turn the rewinder mandrel by hand to rewind the media. Turning the mandrel by
hand can result in rewinder damage.
Installing the Rewinder
1. Ensure the power switch on the rewinder is in the off position.
2. Arrange the rewinder and brackets as illustrated below. Refer to this illustration through
the installation process.
3. Insert the tabs from bracket U into the slots on bracket R. These two brackets will later
be used to position the printer.
R
R-U
U
RW-5.1