AstroNova QuickLabel Kiaro! QL-120, Руководство пользователя

Страница: 162 / 173

UW-5.1 Unwinder
QL-120 User Guide 162
12. Feed the media under the dancer arm and up into the entry slot on the rear of the printer.
The media path is illustrated below.
As the dancer arm is lifted, the mandrel will unwind and feed media as needed. Do not
turn the unwinder mandrel by hand to advance the media. If you need to advance the
media, lift the dancer arm slightly.
13. Insert media along the left-side guide under the transport guide (left) until it stops at the
roller in the feeder slot.
Media at the roller in the feeder slot is automatically pulled in slightly.
14. If the media is not squarely aligned in the feeder slot, adjust the position of the unwinder
as needed.
• Loosen the thumb screws that fasten the UW-5.1 unwinder to the R-U bracket.
Slide the unwinder left/right as allowed by the adjustment slots until the media is
squarely aligned in the feeder slot. Then tighten the thumb screws.
• If a greater adjustment range is needed, loosen the thumb nuts that fasten the R-U
bracket to the U bracket. Slide the unwinder left/right as allowed by the adjustment
slots until the media is squarely aligned in the feeder slot. Then tighten the thumb
nuts.