Note:
Anytime press Clear for a certain time, it will exit and cancel the programming.
X. Run a Chase Group
Note:
Press Clear, it will close all the running chase groups.
XI. Function Wheel Assignment
The pan/tilt channel of the fixtures can be assigned to the function wheels on the controller for easy control.
XII. The Use of Function Wheel
The channel that has been assigned to the function wheel can be controlled by the function wheel.
XIII. Setup of Slope Channels
selection. A flashing LED indicator on the number button indicates an existing chase.
5
Select the desired chases to add into the chase group. Once selected, the chase will start
running. Up to 48 steps can be added. Inactivate E/XY (LED indicator off), then adjust
running speed by the X/Speed function wheel.
6
Press ADD to add the selected chase into the chase group. It will automatically jump to the
next step and close the running chases.
7
Repeat Step 5-6 to add a new step.
8
Press Program to save the chase group and exit.
Step
Description
1
Press Group
2
The LED indicator of the number button with an existing chase group will flash rapidly.
3
Select the desired number button to run the chase group. The LED indicator will slow down
the flash, which means that the chase group is now running.
Step
Description
1
Press Program to enter programming mode
2
Select <=/SETX or =>/SETY
3
Select the desired fixture.
4
Push the slider of the pan/tilt channel of the fixture till the LED indicator is on.
5
Press <=/SETX or =>/SETY again to save and exit.
Step
Description
1
Press E/XY, make sure the LED indicator is on.
2
Select the desired fixtures.
3
Control the fixture with the function wheels.
Содержание WARRIOR 360
Страница 1: ...WARRIOR 360...
