ASTRO U 149 S, Руководство по эксплуатации, Страница: 9 / 52

page 9
Quick start - starting operation of the U 149 S
Operating manual U 149 - Version 08-2015A
Logging in
To log in, enter the IP address of the U 149 S, which appears in the device display, in the address line
of the browser. The menu page “Status” will then appear. Select the item “Log in” from the navigation
menu at the left. The input mask for the log in should then appear (see figure 6, below). In delivery state,
you must use the following log-in data:

User name: “user” or “admin” (input without inverted commas)

Password: astro
Figure 5: Log in
After logging in, the start page of the U 149 S with all relevant system information will appear. The nav-
igation menu and the log-in status display will appear at the left.
Only one user can be logged into the user interface of the U 149 S at a time. The current user is dis-
played in the column at the left, below the menu.
The device status is indicated by a green or red circle. If a green circle is displayed, the device is oper-
ational. If the circle is red, then a fault has occurred.
A list of current errors is available under the menu item “Active alarms”.
HINWEIS
:
For reasons of security, you should change the access data valid upon delivery
(user name and password) to prevent unauthorised access!
The procedure is described in the section “Changing user data”.
Changing the IP address
HINWEIS
:
If you wish to change the IP address, then the settings on the PC must be changed
accordingly.
Start by changing the IP addresses for the management and the data port. To do so, click on the item
“Main” in the menu at the left. You will now see the following table in the content area:
Figure 6: Changing the IP address
You can enter the IP addresses for management ports A and B as well as for data ports A and B in the
“Address” line. Make sure that you activate the ports being used by activating the corresponding radio
button in the line “Active”.
To save your changes, click on the “Submit” button below the last table.
More information on configuring the IP address can be found in the section “Configuring IP interfaces,
IP management and base unit”.