ASTRO U 149 S, Руководство по эксплуатации, Страница: 27 / 52

page 27
“Trsp 1.X - Trsp 2.X” menu
Operating manual U 149 - Version 08-2015A
“Trsp 1.X - Trsp 2.X” menu
To configure the transponders manually, start by selecting the item “Transponder” in the menu at the
left. Then select the option “manual” in the transponder drop-down menu in the “Transponder Settings”
table.
Now click on one of the items “Trsp. 1.1 - 1.4” or “2.1 - 2.4” in the menu at the left. You will then see the
following table at the top of the content area:
Figure 28: “Transponder X.X Settings” table
The following settings can also be entered individually:

Input:
To activate or deactivate the channel, select the corresponding radio button.

Transponder:
Select the preferred reception system from the drop-down menu.

Manual Settings:
Select the preferred reception frequency from the drop-down menu. If you
select the item “manual” from the list, you can enter the required value, in kHz, in the “manual freq.”
input field.

Frequency:
Transponder frequency

Symbol Rate:
Transponder symbol rate

TS-ID:
Transport current ID

ON-ID:
Original network ID
Click on the “Submit” button below the last table to save the changes.
Click on “Reset form” to restore the original settings.