ASTRO U 149 S Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 52

ASTRO U 149 S Скачать руководство пользователя страница 37

page 37

“Update/config.” menu

Operating manual U 149 -

Version 08-2015A

“Update/config.” menu

The menu item “Update/config.” allows you to update the firmware version of your device and upload
and download a variety of configuration data.

Firmware update from a local memory location

You will require an update archive for updating the device firmware. This can be downloaded from the
ASTRO firmware server (address: “http://astro-firmware.de/Headend-Firmware/u1xx”). The file name
of the archive required ends in “.up”. The name is comprised of the type designation of the device (U
149 S) and a four-digit version number.
Once the update archive has been downloaded, start by selecting the item “Update/Config.” in the user
interface menu. The “Software update” table then appears in the content area at the top.

Figure 42: Firmware update

Now click on the “Search” button and select the path to the memory location of the update archive
downloaded beforehand.
Then click on the “Update and Reboot” button to start the update process. Please wait for the process
to be completed, and for the device to reboot.

Available Update Archives

The table tabelle „Available Update Archives“ shows an overview update-archives already stored in the
module (up to ten). Users can have access to older software versions (Installation or deleting).

Bild 46: Firmware Update

Uploading and downloading configuration files

Figure 43: Loading/saving configuration files

Configuration files can be uploaded and downloaded.
To upload files, use the “Search” button to select the preferred file.
Then click on the “Upload” button to start the uploading process.

The following files are available for download:



System settings

(XML format)

Simply click on the corresponding file link to download the file.

«
...
35
36
37
38
39
...
»

Содержание U 149 S





















































Отзывы:

Нет отзывов