manualshive.com logo in svg

ASTRO U 144, Руководство по эксплуатации

Поделиться
Скачать
ASTRO U 144 Скачать руководство пользователя страница 8

Device description

Oerating manual U 144 - 

Version 08-2016A

page 8 

N

OTE

:  

Turning the data knob [4] (fig. 2, above) allows you to navigate through the 

individual menu items in the U 144 display. Press the data knob to switch on the display.

The ASTRO logo will be the first display to appear following activation.

Turning the data knob clockwise allows to you access the individual displays:

Log messages: The last messages entered in the log book are displayed.

Interface settings: IP addresses of the network interface.

Software versions: The version of the plug-in module software currently installed is displayed.

Active alarms: The current error messages are displayed.

DVB-S2 module 1: The status of the four channels set is displayed.

CAM modules 1 - 4 The respective reception channel forwarded to the CAM module is displayed.

.

The different text colours refer to:

Red: Error (the corresponding display in the web interface log book is: “error”)

Yellow: Warning (the corresponding display in the web interface log book is: “warning”)

Purple: Critical error (the corresponding display in the web interface log book is: “critical / alert / 
emergency”)

Light blue: Info (the corresponding display in the web interface log book is: “info”)

Light green: Notice (the corresponding display in the web interface log book is: “notice”)

Содержание U 144





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды