ASTRO U 144, Руководство по эксплуатации

Страница: 18 / 60

Quick start - starting operation of the U 144
Oerating manual U 144 - Version 08-2016A page 18
Setting the signal routing to the CAM modules
Now insert the required CI module into the first slot of the U 164 if you have not already done so. Pro-
ceed as described in the section “Connecting and installing the module”.
Click on the item “CAM Mux” in the web browser interface menu. You will now see the following table:
Figure 11: Signal routing to the CAM modules
In the switch matrix, click on the radio button which connects the receiver DVB-S/S2 RX 1.1 to CAM
module 1.
To save your changes, click on the “Submit” button below the table.
More information on signal routing can be found in the section “Configuring signal paths using the
switch matrix”.
Now click on the item “CAM 1” in the menu at the left. (You may have to press the refresh button in your
browser several times to update the page.) You will now see the following table:
Figure 12: CAM settings
A list of the individual services which the module CAM 1 is receiving appears in the “Status” table. You
can select the service for decryption in the “Decryption Settings” table. To add a service, click on the
plus symbol in the right-hand column.
More information on decryption settings can be found in the section “Setting the decryption”.
When decryption is successful, a text which is highlighted in green appears in the status column (ex-
ample: see figure at left).