ASTRO U 144, Руководство по эксплуатации

Страница: 42 / 60

Menü „ TX 9.. (SPTS)“
Oerating manual U 144 - Version 08-2016A page 42
Menü „ TX 9.. (SPTS)“
The configuration of the SPTS channels is done - depending on the number of activated channels - via
one ore more menus „TX XX...YY“ with XX and YY > 8; e. g. „TX 9...24“. Click on the item „TX 9..24“.
in the main menu on the left. You will now see the following table:
Figure 41: Table 1 „IP TX Channel Settings (SPTS) 9..24“
In column „Source“ you can select the desired program source from a dropdown list. Each channel can
be routed to one of the outputs A or B respectively to to both channels by clicking the radiobutton „On“.
Type in the IP port into the corresponding input fields.
If desired you can delete the channels from the list by clicking on the minus symbol in column „Action“.
Click on the “Submit” button below the last table to save the changes.
Click on “Reset form” to restore the original settings.
To configure an SPTS channel in detail click on one of the items TX9“, „TX 10“, „TX 11“ ... „TX 24“ in
the left column. You will now see the following table:
Figure 42: Table 1 „IP TX Channel Settings“
Here you can activate or deactivate the routing of the selected IP output to ports A and B by clicking
on the corresponding radiobutton. For ports A and B the MAC address is displayed („Destination
MAC“).
For the following parameters you can type in a value for ports A and B:

Transmit IP: Port:
Type in the transmission IP address.

Destination IP: Port:
Type in the IP address of a reception unit.

TOS / TTL:
Here you can type in a value for the „Type of Service“ (for priority of IP data pack-
ages). / Type in a value for the desired period of validity („Time to Live“)

VLAN (Set 0 to disable):
Type in the address of a virtual local network.
N
OTE
:
You can edit further SPTS channels via additional menus TX XX...YY in the
main menu on the left.