page 33
“RX 1.1 - RX 1.4“ menu
Oerating manual U 144 -
Version 08-2016A
“RX 1.1 - RX 1.4“ menu
To configure the transponders manually, start by selecting the item “Transponder” in the menu at the
left. Then select the option “manual” in the transponder drop-down menu in the “Transponder Settings”
table.
Now click on one of the menu items “Trsp. 1.1 - 1.4” in the menu at the left. You will see the following
table in the content area at the top:
Figure 30: “Transponder X.X Settings” table
The following settings can also be entered individually:
Input:
To activate or deactivate the channel, select the corresponding radio button.
Transponder:
Select the preferred reception system from the drop-down menu.
Manual Settings:
Select the preferred reception frequency from the drop-down menu. If you
select the item “manual” from the list, you can enter the required value, in kHz, in the “manual freq.”
input field.
Frequency:
Transponder frequency
Symbol Rate:
Transponder symbol rate
TS-ID:
Transport current ID
ON-ID:
Original network ID
Click on the “Submit” button below the last table to save the changes.
Click on “Reset form” to restore the original settings.
In der next table „SAT RX Status“ you will find an overview of the reception parametes of the reception
channels chosen in the menu.
Figure 31: SAT RX X.X Status“
Содержание U 144
Страница 1: ...Version 08 2016A ...
