page 41
“TX 1..8 (MPTS)” menu
Oerating manual U 144 -
Version 08-2016A
Another table is shown in the following in which settings valid for data ports A and B can be entered.
Figure 40: Table 2 “IP TX1 channel settings”
TS Packets per Frame:
The number of transport stream packets per frame; select a value
between 1 and 7 from the drop-down menu.
Protocol Encapsulation:
Select either “RTP/UDP/IP” or “UDP/IP” as the protocol by clicking
the corresponding radio button.
FEC:
Forward error correction
Select the number of columns from the first drop-down menu (“off” or a value between 1 and 20).
Select the number of rows from the second drop-down menu (“off” or a value between 4 and 20).
Select one of the two options, “Columns and rows” (Col + Rows) and “Column only” (Col only) from
the third drop-down menu.
Select one of the options “Plain”, or “Annex A” or “Annex B” respectively, from the fourth
drop-down menu.
Click on the “Submit” button below the last table to save the changes.
Click on “Reset form” to restore the original settings.
Содержание U 144
Страница 1: ...Version 08 2016A ...
