ASTRO astrojet II plus, Инструкция по установке и эксплуатации

Страница: 2 / 62

REQUIREMENTS
1. An IBM or Compatible Pentium 100 Megahertz PC or better.
2. Windows 95 or 98 installed.
3. A minimum of 10 Megabytes of free hard disk space.
4. At least 16 Megabytes of RAM.
5. A 2X CD ROM or better.
6. An 800 X 600 SVGA Monitor or better.
7. Parallel (Centronics) printer cable, no longer than 6 feet.
8. The Parallel Port must be set to the EPP (Enhanced Parallel Port) setting in the
CMOS of the computer.
SAFETY PRECAUTIONS
THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY. HOWEVER, CERTAIN
SAFETY RULES SHOULD BE OBSERVED WHEN OPERATING THE ASTROJET IMAGE BLASTER
SYSTEM.
BEFORE USING THE PRINTER, YOU SHOULD READ THIS MANUAL CAREFULLY AND FOLLOW
THE RECOMMENDED PROCEDURES, SAFETY WARNINGS, AND INSTRUCTIONS:
1. Keep hands, hair, and clothing clear of rollers and other moving parts.
2. Always turn off the machine before making adjustments, cleaning the machine, or performing any
maintenance not covered in this manual.
3. Turn power off, including conveyor when not in use.
4. Keep this manual with the printer for future reference.
5. If you have any questions contact your local Astro Machine Corporation Distributor.
CAUTION
THIS EQUIPMENT MUST BE CONNECTED TO
A PROPERLY GROUNDED OUTLET. FAILURE
TO DO SO CAN CAUSE ELECTRICAL SHOCK!
This manual is intended solely for the use and information of Astro Machine Corporation, its designated
agents, customers, and their employees. The information in this guide was obtained from several
different sources that are deemed reliable by all industry standards. To the best of our knowledge, that
information is accurate in all respects. However, neither Astro Machine Corporation nor any of its agents
or employees shall be responsible for any inaccuracies contained herein.
ASTROJET is a registered trademark of Astro Machine Corp.
Hewlett-Packard is a registered trademark of Hewlett-Packard Corporation.
Windows 95 and Windows 98 are registered trademarks of Microsoft Corporation.
IBM is a registered trademark of International Business Machines.
All other TradeMarks are the property of their respective holders.
All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying, recording, or any information storage and retrieval system, without permission in writing from the Publisher.