13
III. Data Review and Playback
Data capture records can be reviewed on the display as well as on the chart paper.
During review, the timebase can be expanded or compr essed to give appropriate detail
of the signal.
ACTION
HOW TO
Enter Data Capture Playback
[MODE] [DATA PLAYBACK]
Setup Playback
[SETUP PLAYBACK]
Enable printing of record info
Toggle
[REPORT]
key to
on
. This will print out the header information.
Show where the trigger point is
Toggle
[TrigMark]
key to
on
. This will highlight the trigger point with a
line across the chart.
Play back all of the capture
[MODIFY WINDOW ]
Press the
[100%]
key.
[EXIT]
Compress the playback
[SET MAGNIF]
Turn encoder wheel so that expansion is
X 1/8
.
Select chart format for playback
[SET FORMAT]
Be sure output format is
Chart 1
.
Play back data to paper and display
[SET DEVICE]
Turn encoder wheel so output device reads “
display & chart
”.
[EXIT]
Play out data capture
[RUN PLAYBACK]
Zoom in on the trigger point
[SETUP PLAYBACK] [MODIFY WINDOW ]
With
[UNITS]
set to percentage, press the
[START]
key and turn encoder wheel to
8%
.
Press the
[END]
key and turn encoder wheel to
12%
.
[EXIT]
Expand the playback
[SET MAGNIF]
Turn encoder wheel so that expansion is
X 2
.
[EXIT]
[EXIT]
Play out data capture
[RUN PLAYBACK]
… this completes the exercise.
Throughout the setup of the Dash 10, you can consult the manual for additional help . This Quick Start Guide provides the basic
information for operating the Dash 10. Under many of the menus, you will find additional choices for more advanced capabilities of
the Dash 10, and the Operations Manual provides information on utilizing these features.
Should you require additional assistance, you can contact our Technical Support Department toll -free at 800 -343-4039 or
by e-mail:
