SECTION 2
INSTALLING THE PRINTER
5
SECTION 2 – Installing the Printer
Before using the AstroJet M1 printer the following must be done:
Choose a location for the Printer
Unpack and assemble the Printer
Plug in the Printer and connect it to the computer
Install the Printer Driver
Install the Service Station
Install the Ink Tanks
Install the Printhead
Set up the feed on the Printer
Choose a Location
The AstroJet M1 should be placed on a sturdy level worktable or cabinet at least 9 inches from any
walls. Protect the AstroJet M1 from excessive heat, dust, and moisture – avoid placing it in direct
sunlight.
Unpacking and Setup
Remove the Printer and its parts from the carton. Remove all packing tape. The screws that attach the
various parts of the guides to the Printer are under the tape in their respective positions.
Begin by installing the Adjustable Side Guide with two
screws [1]:
