www.Astria.US.com
126891-01A
5
UNPACKING
CAUTION: Do not remove data
plates from grate assembly. Data
plates contain important warranty
and safety information.
1. Remove log set by lifting tray handles. Set
tray on floor.
2. Remove contents from side compart-
ments (see Figure 2).
3. Remove log set from tray by cutting
zip ties.
4. Check heater for any shipping damage.
If heater is damaged call INNOVATIVE
HEARTH PRODUCTS at 1-800-655-2008
for replacement parts before returning to
dealer.
Figure 1 - Log Set in Packing Box
Carton Tray
with Handles
GENERAL INFORMATION
These vented decorative gas log sets incorpo-
rate uni-body constructed ceramic fiber logs
and ember bed burner which glow realistically
when the appliance is in operation.
These units are remote controlled-decorative
rated and are equipped with millivolt gas
valves. The remote control allows for flame
height adjustment, timer and on/off control.
A spark ignition system (piezo) allows the gas
pilot to be lit without the use of matches or
batteries and permits operation of the heater
during a power outage.
These log sets come with a Floor Media Kit
included. This kit is used to blend the floor and
the log set together for a more natural look.
INSTALLATION
WARNING: A qualified ser
-
vice person must install heater.
Follow all local codes.
WARNING: Before installing
in a solid fuel burning fireplace,
the chimney flue and firebox
must be cleaned of soot, creo-
sote, ashes and loose paint by a
qualified chimney cleaner. Creo
-
sote will ignite if highly heated. A
dirty chimney flue may create and
distribute soot within the house.
Inspect chimney flue for damage.
If damaged, repair flue damper
before operating appliance.
CAUTION: This heater creates
warm air currents. These currents
move heat to wall surfaces next
to heater. Installing heater next
to vinyl or cloth wall coverings or
operating heater where impurities
(such as, but not limited to, to
-
bacco smoke, aromatic candles,
cleaning fluids, oil or kerosene
lamps, etc.) in the air exist, may
discolor walls or cause odors.
WARNING: Special care is
required if you are installing the
unit into a sunken fireplace. You
must raise the fireplace floor to
allow access to gas log controls.
This will insure adequate air
flow and guard against sooting.
Raise the fireplace floor using
noncombustible material.
f i r e - p a r t s . c o m
