Inst 276 - Viron Connect Pool & Spa Controller V0610
9
When selecting Spa mode on the Genus Touchscreen Console the Viron Pump will automatically switch to High
Speed to allow effective spa jet action.
If you have a gas heater connected to the Viron Connect System, the Viron Pump will automatically switch to
medium speed when the heater ignites. This ensures there is sufficient water flow to efficiently operate your gas
heater.
When selecting backwash mode on your Hurlcon VX or E Series Chlorinator (if installed) the Viron Pump will
automatically switch to high speed to ensure ideal backflow velocity through the filter media bed.
CHANNEL 1 EQUIPMENT CENTRE OVERRIDE SWITCH
The Channel 1 (Filtration Pump) override switch is located on the front of the control unit in case you should
require manual control of the pump for the purposes of backwashing, maintenance, etc.
This switch should be in the “Auto” position for normal remote and timer control.
The “On” position turns the pump on regardless of the timer and remote control settings.
The “Off” position prevents the Channel 1 operating regardless of the timer and remote control settings.
When a VX S model is connected to the system, The Overide switch should remain in the on position during
normal operation. When backwashing, the pump can be operated using the On/Off/Auto button of the Salt
Chlorinator
LCD DISPLAY
o
The Main Menu
Display
REMOTE (SECOND) TOUCH PAD CONSOLE
A second push button console may be installed to allow operation of your pool equipment from another location.
To operate, the second touch pad must have the time clock programs disabled. This prevents two consoles
conflicting with each other. Timer and set up programming of the Viron Connect System MUST be done via the
touchscreen console only. The second console is used only to operate equipment once the system has been set
up.
