Astrapool Viron, Инструкция по установке и эксплуатации

Страница: 14 / 20

Inst 276 - Viron Connect Pool & Spa Controller V0610
14
E Series Salt Chlorinators
To configure the E Series salt chlorinator to Fast Comms;

Through the MAINT option, enter installation mode.

In the installation menu, scroll through options until timer option

Select timers DISABLED

Select G4 system INSTALLED

Select Fast Comms ENABLED
FM Remote Control Module
To configure the FM received to Fast Comms;

Remove cover of FM receiver enclosure

Change jumper from slow comms (pins 4 & 5) to fast comms (pins 3 & 4)
Additional touchpad(s)
If using additional 7 button (G4) or 4 button (Plus4) touchpad‟s, these need to be configured to Fast Comms also;

For the 7 button remote, enter standard programming menu by holding in the ON/OFF button and pressing
in sequence WARM / COOL / WARM

Configure control based on prompted options

When option for slow or fast comms is displayed, select Fast Comms “YES”

You will also be prompted if you wish to use channel 3 button on the touchpad for AUX 3 or for changing
valve actuators

For the 4 button (Plus4) remote, change jumper from slow comms (pins 4 & 5) to fast comms (pins 3 & 4)
If you have any issues with the installation or set up of the Viron Connect control system, please contact your local
Astral Pool sales and service office on the number below;
Victoria: New South Wales: Queensland: South Australia: Western Australia: Gold Coast: Townsville:
Ph: (03) 8796 8600 Ph: (02) 9853 2100 Ph: (07) 3308 5400 Ph: (08) 8152 7600 Ph: (08) 9350 2600 Ph: (07) 5552 2600 Ph: (07) 4750 3100
Fax: (03) 8796 8670 Fax: (02) 98532170 Fax: (07) 3308 5470 Fax: (08) 81527670 Fax: (08) 9350 2670 Fax: (07) 5552 2670 Fax: (07) 4750 3170