Astral Pool BDP Series, Руководство пользователя

Страница: 17 / 35

BDP SERIES
F) HP TOO HIGH
TROUBLE DETECTED PROBABLE CAUSES SOLUTIONS
The air from the condenser is
too hot. Condenser air insufficient or
very hot. Check fan function.
The air from the condenser is
at the inlet temperature. Condenser and filter is very
dirty. Clean it.
Condenser too hot. Excess of air or refrigerant in
installation. Purge or eliminate refrigerant
excess.
G) LP TOO LOW
TROUBLE DETECTED PROBABLE CAUSES SOLUTIONS
Air from the condenser is too
cold. Condensing pressure
regulating system is not
working Repair or replace
H) SUCTION PRESSURE TOO HIGH
TROUBLE DETECTED PROBABLE CAUSES SOLUTIONS
Noisy compressor Compressor suction valves
broken. Check the valves and remove
it
High pressure too low Reversing valve faulty. Repair or replace
I) SUCTION PRESSURE TOO LOW
TROUBLE DETECTED PROBABLE CAUSES SOLUTIONS
Lack of refrigerant Gas leakage in the refrigerant
circuit. Remove leakage and refill.
Refrigerant temperature
variation at the filter height. Liquid filter blocked Replace filter
Refrigerant does not pass
through the valve. The thermostatic element of
the expansion valve lost part
of the load. Replace thermostatic element
Performance loss Expansive valve blocked Clean or replace expansive
valve
Environmental temperature
too cold. Control thermostat contacts
locked in closed position. Repair or replace the cold
control thermostat.
Excessive superheat. Too high pressure drop in the
evaporator Check that the external
equalizer is not obstructed.