© TALLERES DEL AGUA S.L. 2008. TODOS LOS DERECHOS RESERVADOS. DOCUMENTO CONFIDENCIAL Y EN PROPIEDAD.
Page 23 of 53
ESPAÑOL
Las circunstancias por las que su ENFRIADORA AIRE-AGUA EF podría no funcionar se detallan
a continuación:
EL EQUIPO NO SE PONE EN MARCHA:
Interruptor de maniobra abierto
: Comprobar que no hay ningún cortocircuito en el cuadro de
maniobra, reparar el posible cortocircuito.
La bobina del contactor no se activa
: Comprobar que no está quemada en cuyo caso sustituir.
Comprobar los enclavamientos que activan dicha bobina.
Térmico abierto:
Comprobar el voltaje de la línea. Comprobar que las condiciones de trabajo son
las correctas. Excesivo consumo del compresor. Cortocircuito en la línea del compresor.
Presostato de baja abierto:
Comprobar el funcionamiento de este, sustituyéndolo si fuera
necesario. Comprobar el correcto funcionamiento del ventilador. Comprobar la carga de gas del
equipo (perdida de refrigerante, equipo con fugas) para solucionar esto ver apartado carga de gas.
Comprobar que hay buena circulación de aire en la batería de intercambio. Comprobar que no hay
obstrucciones en el circuito frigorífico eliminándola si ocurriera esto. Comprobar el correcto
funcionamiento de la válvula Termostática, comprobando que el bulbo no ha perdido gas y que la
toma de presión no está obstruida, sustituir en caso necesario.
Presostato de alta abierto:
Comprobar el funcionamiento de este, sustituyéndolo si fuera
necesario. Comprobar la carga de gas del equipo (exceso de refrigerante) para solucionar esto ver
apartado carga de gas. Comprobar que no hay obstrucciones en el circuito frigorífico eliminándola
si ocurriera esto. Comprobar que hay una buena circulación de agua por el condensador,
verificando que no hay obstrucciones en el circuito hidráulico, que las llaves de corte están abiertas
y que la bomba de depuración funciona correctamente (sustituir si fuera necesario).
Alarma de falta de caudal:
Comprobar el correcto funcionamiento de la bomba depuradora
(puede que no de el caudal necesario). El filtro de la bomba depuradora esta sucio, en cuyo caso
proceda a su limpieza. Las llaves de By-Pass están cerradas o no lo suficientemente abiertas,
proceda a su revisión. La bomba no está depurando, revise el estado del reloj horario y el modo de
depuración. El flujostato está averiado (avise al servicio técnico).
Ciclo de desescarche:
Las condiciones de aire ambiente no son adecuadas. La máquina no opera
en estas condiciones, en este caso se recomienda desconectar la máquina.
NIVEL DE ACEITE BAJO:
Carga inicial de aceite bajo:
Completar hasta el nivel necesario.
Manchas de aceite en el equipo:
Comprobar fugas en el circuito frigorífico reparándolas,
verificar que las válvulas de alta y baja están bien apretadas, en caso de avería sustituirlas.
EL EQUIPO FUNCIONA EN CICLOS DEMASIADO CORTOS:
Presostato de baja se abre y se vuelve a cerrar:
Verificar los apartados del punto anterior
“presostato de baja abierto”.
Contacto intermitente en el control de la máquina:
Reparar o reemplazar el fallo del control
eléctrico. Comprobar la sonda de temperatura.
Comprobar que el equipo no es demasiado grande para la instalación.
EL EQUIPO FUNCIONA CONTINUAMENTE: