Astoria Sabrina, Инструкции для пользователя, Страница: 51 / 188

USER Manual 51
of
260
Sabrina
English
7.5.4 Dispensing group wash
SAE version
The washing operations can also be carried out si-
multaneously on multiple dispensing groups. To
exit the washing phase, the washing procedure
must have been completed on all groups.
Wash the dispensing groups on a daily basis as indicated be-
low:
• Remove the filter from the filter holder and fit a blind filter
(see the standard supplied parts).
• Press and hold the double espresso button (2) on
the pushbutton panel of the group that you would like to
clean, for 10 seconds until the button’s LED starts to flash.
• Pour the specific cleaner (see spare parts) into the filter
holder with the blind filter and hook it to the dispensing
group.
• Press the double espresso button (2) again.
• Whilst the machine is performing the first wash cycle, the
(1) and (2) button LEDs flash.
• When the first cycle has finished, the double espresso but -
ton LED (2) will flash: remove the filter holder from
the group.
• Press the double espresso button (2) again to carry
out the rinse procedure.
• Whilst the machine is performing the rinse cycle, the
(1) and (2) button LEDs flash.
• Once the rinsing procedure has finished (approximately
30 seconds), the machine is ready to dispense normally.
1 2 3 4 5 6
7.5.5
Dispensing group wash SAE-
DISPLAY version
With this procedure, all of the groups are washed
at the same time; each keypad controls the refer-
ence group. To access the menu, please refer to
Paragraph "6.11.7 Dispensing group wash".
Wash the dispensing groups on a daily basis as indicated be-
low.
To wash the dispensing groups, press the indi-
cated button.
To start the washing procedure, press the
“YES” button and proceed as follows:
1 2 3 4 5 6
Yes No
Force washing
Are you sure?
• Remove the filter from the filter holder and fit a blind filter
(see the standard supplied parts).
• Pour the specific cleaner into the blind filters and attach
the filter holders to the dispensing groups.
• Press each group’s double espresso button (2).
• The “GROUP WASH IN PROGRESS” message will appear
on the display. Whilst the machine is performing the first
wash cycle, the button LEDs (1) and (2) flash.
• When the first cycle has finished, the double espresso but -
ton LEDs (2) will flash: remove the filter holders from
the groups.
• Press the double espresso buttons again (2) to carry
out the rinse procedure.
• Whilst the machine is performing the rinse cycle, the
(1) and (2) button LEDs flash.
• Once the rinsing procedure has finished (approximately
30 seconds), the machine is ready to dispense normally.