background image

Before operating this unit ensure you have read and understand all of the

warnings and safety statements in this manual.  If you do not understand any of
these warnings or statements, please contact your dealer or the manufacturer for

an explanation.

WARNING:

  Never let children use this unit unsupervised.

This section describes the components of your unit and how to operate them.

Door operation

WARNING:  

The door must be fully closed and secure before filling the tub

otherwise leaking may occur causing flooding or damage to the location.

     The door lock handle is located on the top of the unit.
     To open the rotate the handle counter clockwise to release the door
     To close and lock the door rotate the handle clockwise to secure

Diverter valve

The diverter valve is used to control the flow of water to the following devices:

     The overhead shower
     The body jets
     The shower wand

To operate the diverter valve rotate to the device you wish to use you will feel a
click for each location.

ON/OFF Valve

The valve will turn the water ON or OFF for the Walk in Tub.  You can also adjust
the water flow between full ON and the OFF position.

Turn the valve to the ON position to send water to your selected device.  Return
the valve to the OFF position to stop the flow of water.

Thermostatic faucet

The unit is equipped with a thermostatic faucet for setting the mix between hot and
cold water. The temperature markings are for reference only as the unit does not
elevate the water temperature beyond the temperature of your hot water heater.

        

Operation

15

 

Содержание WT62311J-AC-II-R


























Отзывы: