The input for the “hot” and “cold” water supplies are located on Thermostatic faucet
- each location is labeled with a red or blue sticker.
Two flexible connection hoses have been provided to make the supply
connections. The hoses use 3/8” compression fittings for connection.
We recommend you install disconnect valves on your supply connections for the
supply “hot” and “cold” to aid in any needed future service of the unit.
Using the flexible line make the supply “hot” and “cold” connections
The unit MUST be connected to a GFCI protected circuit.
The unit comes equipped with a 3 foot pig tail with flying leads.
Connect these leads a junction box that is connected to GFCI protected circuit.
Replace all of the removed access panels
Step 4 Water supply connections
14
Step 5 Electrical Connection
Step 6 Install the walk-in tub skirt
