Install your unit according to the directions in this section in the order presented.
Step 1 Remove Access Panel for installation
A small access panel is located under the faucets use a flat head screw driver at
the bottom on the panel to remove.
Located under the door handle is a large access panel, left up on the shelf bar to
remove not tools are needed.
Optional Side panel (Feature varies by model)
Units that are intended to be installed in a corner or free standing may have an
optional side panel installed.
Remove the panel with the use of a flat head and Phillips screw driver.
Use the flat head screw driver to remove the decorative cover, then using the
Phillips screw driver remove the screws holding the panel in place.
Note the direction and location of each panel removed.
Installation
11
