Aston Global Moselle SDR976, Инструкция по установке и эксплуатации

Страница: 15 / 27

Hanging the Door
UPPER ROLLER CAM
ADJUSTMENT
Rotate the outer edge
of roller assembly usin-g---��
the small hex,
while holding the
large hex wrench ---­
in place.
Bottom Roller Guide
Assembies
� �
@)
g
End View
upper roller
assembly (9)
-- top rail (2)
bottom roller
-guide
assembly (10)
Suspend the sliding door (4) on the top rail (2). Slide the bottom edge of sliding glass
door (4) into the groove of the sliding door track divider (8). Adjust the fasteners on
both upper roller assemblies (9) to insure the bottom edged of sliding glass door (4)
does not touch the bottom of sliding door track divider (8). Install the bottom roller
guide assemblies (10) on the sliding door (4) to secure the sliding glass door (4) to top
rail (2). Adjust the bottom roller guide assemblies (10) so that the distance between
the bottom of top rail (2) and the top of bottom roller guide assemblies (10) has a gap
of 1/32". This gap is a starting gap, check that the sliding door rolls smoothly along the
the top rail. Make adjustments if needed.
1 4