Aston Global Moselle SDR976, Инструкция по установке и эксплуатации

Страница: 16 / 27

Install the Door Threshold
0½"
M4X40
The Door Threshold is used to prevent water from seeping out while bathing.
Install the threshold according to these instructions.
1. Measure the distance between the fixed glass (3) and the shower wall. See
figure 1
2. Using a hacksaw cut the threshold bar (11) to fit distance measured between
the fixed glass and shower wall. Remove any sharp edges or burrs after
cutting threshold bar (11 ). See figure 2
3. Position the threshold bar (11) to shower base by aligning in door opening with
fixed glass (3). Mark the threshold end cap (12) mounting hole locations. See
figure 3
1 5