Assistive Technology MiniMerc, Руководство пользователя

Страница: 49 / 50

47
Technical Information
Communications regulation information
FCC declaration of conformity
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Radio and television interference
The equipment described in this manual generates, uses, and can
radiate radio frequency energy. If it is not installed and used
properly it may cause interference with radio and television
reception.
This equipment has been tested and found to comply with the
limits for a Class B digital device in accordance with the specifica-
tions in Part 15 of the FCC Rules. These specifications are designed
to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that
interference will not occur in a particular installation.
You can determine whether your MiniMerc system is causing
interference by turning it off. If the interference stops, it was
probably caused by the MiniMerc or one of the peripheral devices.
If your MiniMerc system does cause interference to radio or
television reception, try to correct the interference by using one or
more of the following measures:
n
Turn the television or radio antenna until the interference
stops.
n
Move the MiniMerc to one side or the other of the television
or radio.
n
Move the MiniMerc farther away from the television or radio.
n
Plug the MiniMerc into an outlet that is on a different circuit
from the television or radio. (That is, make certain the
MiniMerc and the television or radio are on circuits controlled
by different circuit breakers or fuses.)
If necessary consult Assistive Technology, Inc. See the service and
support information that came with MiniMerc.
Changes or modifications to this product not authorized by ATI
could void the FCC Certification and negate your authority to
operate the product.
Important This product was tested for FCC compliance under
conditions that included the use of ATI-approved peripheral devices
and shielded cables and connectors between system components. It
is important that you use ATI-approved peripheral devices and
shielded cables and connectors between system components to
reduce the possibility of causing interference to radios, television
sets, and other electronic devices. You can obtain ATI-approved
peripheral devices and proper shielded cables and connectors from
ATI.
Responsible party (for FCC matters) : Assistive Technology, Inc.
Industry Canada statement
This Class B device meets all requirements of the Canadian
interference-causing equipment regulations.
Cet appareil numérique de la Class B respect toutes les exigences
du Règlement sur le matérial brouilleur du Canada.
Europe—EU Declaration of Conformity
This device complies with requirements of the European Directives
89/336/EEC (for IT devices) and 93/42/EEC (for medical devices).