Assistive Technology MiniMerc, Руководство пользователя

Страница: 34 / 50

32
How do I attach a switch to MiniMerc?
To use a single switch (for automatic scanning):
Insert the plug from the switch into the Switch 1-2 jack on the side of the MiniMerc. Click the Setup
button in the Mercury Control Panel, then click the Switches tab and set Switch 1 to the function
required by the program you are using. Make sure that Switch 2 is set to Ignore.
To use two switches simultaneously (for dual-switch scanning):
Use a dual switch (such as the Rocker switch from
Tash, Inc.) and insert the plug into the Switch 1-2 jack
on the side of MiniMerc. Or, using 2 single switches,
insert the plug from each switch into a “splitter,” then
plug the splitter into the Switch 1-2 jack. The splitter (or
“Y Adapter”) is available from RadioShack
®
, and the
catalog number is 274-375B. The jacks are color-
coded: Nickel for left (Switch 1), and Gold for right
(Switch 2).
To use the Wheelchair Joystick input:
See page 34 for information on using a Wheelchair
Joystick.
To turn MiniMerc on using a switch:
If you have a single switch attached, you can turn MiniMerc
on or wake it from Stand By mode by pressing the switch. If
you have two switches attached, switch 1 will turn the
MiniMerc on or wake it from Stand By.