Assa Abloy Sargent Passport 1000 PG, Руководство по установке

Страница: 11 / 24

11
1-800-727-5477 • www.sargentlock.com
Copyright © 2012, 2022, SARGENT Manufacturing Company. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing
Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
A7807D 12/22
Passport 1000 PG
Mortise Lock
Installation Instructions - Installation of Cylinder
10
Note: For proper cylinder/parts orientation see Figure
10A. Slide cylinder through the spring and rosette/
collar and screw into lockbody, rotating the cylinder
clockwise.
Cylinder should be
fl ush with rosette/collar.
Note: SARGENT logo must be horizontal and on the
top of the cylinder (Figure 10B).
1. Secure the cylinder by tightening cylinder clamp
screw located above the deadbolt.
2. Using the key, verify that the key retracts the
latchbolt (and deadbolt).
Rosette must
be oriented as
shown
Align cylinder groove
with tapped hole, then
tighten set screw to
hold lock cylinder
Position cylinder so that the SARGENT
logo is right-side up.
Correct Incorrect
Installation Instructions - Deadbolt Functions Only (82276 & 82277)
11
Back Plate
#6 x 3/8" Round Head
Wood Screws
#6-32 x 3/8" Round
Head Machine Screws
#6-32 x 1/4"
Flat Head Screw
Thumb Turn
Alignment Tool
1. Insert alignment tool (supplied) into lock body thumb
turn.
2. Slide back plate over tool and make level.
3. Secure back plate to door with two (2) #6 x 3/8" round
head wood screws or #6-32 x 3/8” round head machine
screws.
4. Dispose of tool, position thumb turn over back plate
(Figure 11) and secure with #6-32 x 1/4" fl at head screw.
Note: Thumb turn should cover screw head when deadbolt is
retracted.
5. Refer to instructions (A5675G) included in package
included with lock.
Figure 10B Figure 10A
Figure 11 Detail Figure 11