700703 REV H 09/18
ADAEZ Wireless Interface Module
Installation and Operation Instructions
9 of 17
The ACCESS CTRL OUT contact will close when the
WIM module has received an authorized signal to
switch the LOCK contact.
Closing the FIRE PANEL contact will prevent the door
operator from accepting an activate signal or will close
the door operator if it is in the open position.
NOTE:
1. Refer to Figure 6 and connect the optional Access
Control Input contact, Alarm Panel Output contact,
or Fire Panel Input contact.
Closing the ACCESS CTRL IN contact will switch the
state of the LOCK contact and enable the OUTSIDE
pushbutton.
13
Connect the WIM to Access Control, Alarm Panel, or Fire Panel
INSIDE
BUTTON
INSIDE BUTTON
PRESS & RELEASE
TO LEARN
HOLD TO ERASE
OUTSIDE
BUTTON
DOOR
OPERATOR
FIRE P
ANEL
IN COM OUT
A
CCESS CTR
OUTSIDE B
UTT
ON
DISABLE
LOCK
PO
WER
NO COM NC
LOCK
OUTSIDE BUTTON
PRESS & RELEASE
TO LEARN
HOLD TO ERASE
OPERATOR
SIGNAL
SIGNAL
DELAY
POWER IN
12 OR 24V
+
CH S
ALARM
PANEL
FIRE
PANEL
ACCESS
CONTROL
+
CH S
Figure 6
