KESO KEK i-handle S
KESO AG
Subject to change without notice
Page 24 from 34 pages
11
Programming
The KESO Management Software (see also 4) is the basis for programming and management in
the PC Version or PC Time Version
IMPORTANT: Always perform programming and deletion with the door open to avoid
the door accidentally closing.
11.1
Minimum user training
Programming with the KESO Management Software is basically the same as programming KESO
batchless electronics.
11.2
KAPI BUS programming interface
The KAPI BUS programming interface is located at the centre of the reader module on the
external shield.
IMPORTANT: this interface can only be used in combination with the KESO KEK
Programmer PPG V2.