KESO KEK i-handle S
KESO AG
Subject to change without notice
Page 21 from 34 pages
9
Warning and Status Messages
Warning and status messages can be set or changed at any time with the KESO Management
Software (see Item 4). The messages are set as follows as a factory default:
Function
Default
status
Comment
Buzzer
ON
OFF
Extends the battery life
LED Signaling
ON
OFF
Extends the battery life
Flat battery signaling
ON
OFF
Extends the battery life
Always open signaling
ON
OFF
Extends the battery life
Indicate latch in place
ON
OFF
Extends the battery life
Opening duration on access
5 sec
Range 5 to 30 seconds
9.1
Access permitted
Default setting:
•
If access is permitted an audible signal is emitted and the green
LED flashes
9.2
Access denied
Default setting:
•
If access is denied an audible signal is emitted and the red
LED flashes
9.3
Always open
Default setting:
•
If always open is set (e.g. via a time slot for a PC Time
Version) the green LED flashes periodically
9.4
Status change for office function
The switch from always open to always closed state is indicated by the red and
green LEDs flashing twice simultaneously.
9.5
Low battery power
Low battery power is indicated by a multiple stage warning message (optical and
acoustic).
KESO recommends checking the battery capacity once a year!
